HDBaseT 100m Receiver + Splitter W/ PoE, Bi-directional RS-232 & IR, Support 4K Ultra HD

Introduction

The D2G ET-H4T2100 & ET-H4R2100 HDMI Extender Set supports HDBaseT technology which transmits HDMI signal and multi-channel audio at resolution Ultra HD 4K x 2K (3840 x 2160, 30Hz) and 1080p Full HD up to 100m via Cat5e or Cat6 cable. 
The Extender Set is embedded with HDMI Splitter function, as well as receiver powered by POE. The EDID priority management of HDMI outputs supports EDID Hotplug refreshing function. This product also provides Bi-Directional RS-232 and IR to control the connected devices from either source or display location. 
All the features are made to simplify installation and reduce costs, but at the same time providing exceptional video and audio quality. The HDBaseT 100m HDMI Extender Set is the perfect solution for Digital Signage, tradeshows, home theater installations, medical facilities, and other public exhibitions.
 
Features

·        Two sets of HDMI output available.
·        Receiver can be powered by existing Ethernet cable.
·        Plug and Play - no driver or software installation needed.
·        Built-in EDID Hotplug Refreshing Function.
·        EDID priority management of HDMI outputs.
·        Maximum distance of HDMI, IR, and RS-232 up to 100m.
·        Bi-Directional RS-232 pass through and IR Control.
·        Supports HDMI resolutions up to Ultra HD 3840 x 2160 (4K x 2K, 30Hz) and 1080p Full HD.
·        Full HDCP and HDMI Compliance.
·        Support Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, LPCM 7.1 audio.
·        Support 36bit Deep Color (12bit each).
·        Support 3D, CEC & Lip Sync pass-through.
·        Locking DC12V 3A Power Jack.

Specification