HDBaseT 100m Extender Set W/ PoE, Bi-directional RS-232 & IR, Support 4K Ultra HD

Introduction

The D2G ET-H4T1100 & ET-H4R1100 HDBaseT 100m Extender Set supports HDBaseT technology which transmits HDMI signal and multi-channel audio at resolution Ultra HD 4K x 2K (3840 x 2160, 30Hz) and 1080p Full HD up to 100m via Cat5e or Cat6 cable. 
The Extender Set is embedded with EDID priority management of HDMI outputs supports EDID Hotplug refreshing function. The receiver is powered by POE. This product also provides Bi-Directional RS-232 and IR to control the connected devices from either source or display location. 
All the features are made to simplify installation and reduce costs, but at the same time providing exceptional video and audio quality. The HDBaseT 100m Extender Set is the perfect solution for Digital Signage, tradeshows, home theater installations, medical facilities, and other public exhibitions.
 
Features

·        Receiver can be powered by existing Ethernet cable.
·        Plug and Play - no driver or software installation needed.
·        Built-in EDID Hotplug Refreshing Function.
·        EDID priority management of HDMI outputs.
·        Maximum distance of HDMI, IR, and RS-232 up to 100m.
·        Bi-Directional RS-232 pass through and IR Control.
·        Supports HDMI resolutions up to Ultra HD 3840 x 2160 (4K x 2K, 30Hz) and 1080p Full HD.
·        Full HDCP and HDMI Compliance.
·        Support Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, LPCM 7.1 audio.
·        Support 48bit Deep Color.
·        Support 3D, CEC & Lip Sync pass-through.
·        Locking DC12V 2A Power Jack.
 
Specification